EPS foam machinery, foam machinery prices, foam machinery manufacturers
your current location : Home >> News >> News and information

Contact UsContact Us

Zhejiang Huasheng Machinery Equipment Co., Ltd

Tel: 0571-69961788 69961820

Fax: 0571-63260721

Email: info@zjhssb.com

Address: No.88, Guanting, Baiqian village, Luzhu Town, Fuyang District

website: en.zjhssb.com

Maintenance of foam molding machine

2021-06-25 15:26:36

As everyone knows, if the foam molding machine can run for a long time, it needs to be maintained at work. This can reduce the failure rate of the equipment and prolong the service life of the equipment.

Below Zhejiang Huasheng EPS foaming machine manufacturer and everybody explain foam molding machine maintenance.

Check before and after use

1 we need to check the front and back of the foam machine. It is necessary to determine if the equipment can be used normally and whether there is any abnormal buzz.

2. Confirm the indicator light. If there are some faults, the corresponding indicator light will be on directly. Then we can't work properly. We have to check first to make sure the trouble is solved before use.

3 after use, stop the equipment, turn off the relevant power supply and valves, continue to use and start to avoid unnecessary problems.

In fact, regular maintenance of foam molding machines is not difficult. The average employee also knows how to deal with it. For most businesses, the first thing is to implement. Everyone should operate carefully and check regularly. Only in this way can we let us know what kind of problems have arisen, whether some parts need to be replaced, and so on. If the maintenance is convenient, many problems can be avoided, the service life of the equipment can be extended, and our rights can be guaranteed.

The above is the maintenance and repair of foam plastics molding machine explained by Zhejiang Huasheng EPS foaming machine manufacturer.

Foam machine

Recent browse:

Related news