EPS foam machinery, foam machinery prices, foam machinery manufacturers
your current location : Home >> News >> common problem

Contact UsContact Us

Zhejiang Huasheng Machinery Equipment Co., Ltd

Tel: 0571-69961788 69961820

Fax: 0571-63260721

Email: info@zjhssb.com

Address: No.88, Guanting, Baiqian village, Luzhu Town, Fuyang District

website: en.zjhssb.com


The principle of foam machinery

2020-09-14 00:00:00
a

A certain amount of foaming agent and water vapor are retained in the beads after the foam mechanical equipment is released. When the machine is released, it condenses into liquid, and the liquid foaming agent is dissolved in polystyrene so that the pressure in the bubble decreases rapidly. Negative pressure (partial vacuum) occurs in the bubble, and the beads are very soft and changeable. Therefore, the air pressure should not be too high, the inner wall of the air duct should be as smooth as possible, and the bending radius should be as large as possible (to reduce the collision resistance). The pipeline should be a good conductor of electricity, and the whole line must be grounded to avoid electrostatic ignition. The transmission speed should not exceed 8m / s to avoid particle damage. A certain amount of foaming agent and water vapor are retained in the beads after the foam mechanical equipment is released. When the machine is released, it condenses into liquid, and the liquid foaming agent is dissolved in polystyrene so that the pressure in the bubble decreases rapidly. Negative pressure (partial vacuum) occurs in the bubble, and the beads are very soft and changeable.

Production of foam machinery manufacturers

Recent browse:

Related products

Related news