EPS foam machinery, foam machinery prices, foam machinery manufacturers
your current location : Home >> News >> News and information

Contact UsContact Us

Zhejiang Huasheng Machinery Equipment Co., Ltd

Tel: 0571-69961788 69961820

Fax: 0571-63260721

Email: info@zjhssb.com

Address: No.88, Guanting, Baiqian village, Luzhu Town, Fuyang District

website: en.zjhssb.com


Notes on maintenance of EPS foaming machine

2020-08-31 00:00:00
a

The so-called EPS foam cutting machine is a device for processing foam, sponge and other chemical industries. At present, laser is mainly used for cutting. Because the laser beam cutting is not easy to deform, the incision is smooth and the edge is not fuzzy, it is used in various fields at present. Of course, in the process of using foam cutting machine, it will inevitably cause failure and need to be repaired. Now we will talk about the following precautions during maintenance.

Only those who know how to use this operation can repair or replace components! In order to prevent accidents or machine damage, the following principles must be observed during inspection:

1. In case of failure, disconnect the power supply and stop the machine;

2. When the machine cannot be used normally, consult the manual and operation manual to determine the correct measures to be taken; before checking or replacing components, the power must be turned off.

3. The parts (components) removed during the inspection shall be replaced with the same new parts (parts) at the same place. The instruments used during the inspection must be calibrated.

4. It is forbidden to place inflammables or metal articles in the electric cabinet or junction box;

5. Check cables and wires regularly for damage to prevent leakage or electric shock.



EPS foaming machine

Recent browse:

Related news